NXP Semiconductors K32 L2A Series, Reference Manual, Page: 190 / 1379

ADCx_SC2 field descriptions (continued)
Field Description
• Software trigger: When software trigger is selected, a conversion is initiated following a write to
SC1A.
• Hardware trigger: When hardware trigger is selected, a conversion is initiated following the assertion
of the ADHWT input after a pulse of the ADHWTSn input.
0 Software trigger selected.
1 Hardware trigger selected.
5
ACFE
Compare Function Enable
Enables the compare function.
0 Compare function disabled.
1 Compare function enabled.
4
ACFGT
Compare Function Greater Than Enable
Configures the compare function to check the conversion result relative to the CV1 and CV2 based upon
the value of ACREN. ACFE must be set for ACFGT to have any effect.
0 Configures less than threshold, outside range not inclusive and inside range not inclusive; functionality
based on the values placed in CV1 and CV2.
1 Configures greater than or equal to threshold, outside and inside ranges inclusive; functionality based
on the values placed in CV1 and CV2.
3
ACREN
Compare Function Range Enable
Configures the compare function to check if the conversion result of the input being monitored is either
between or outside the range formed by CV1 and CV2 determined by the value of ACFGT. ACFE must be
set for ACFGT to have any effect.
0 Range function disabled. Only CV1 is compared.
1 Range function enabled. Both CV1 and CV2 are compared.
2
DMAEN
DMA Enable
0 DMA is disabled.
1 DMA is enabled and will assert the ADC DMA request during an ADC conversion complete event
noted when any of the SC1n[COCO] flags is asserted.
REFSEL Voltage Reference Selection
Selects the voltage reference source used for conversions.
00 Default voltage reference pin pair, that is, external pins V
REFH
and V
REFL
01 Alternate reference pair, that is, V
ALTH
and V
ALTL
. This pair may be additional external pins or
internal sources depending on the MCU configuration. See the chip configuration information for
details specific to this MCU
10 Reserved
11 Reserved
Memory map and register definitions
K32 L2A Reference Manual, Rev. 2, 01/2020
190 NXP Semiconductors