NXP Semiconductors K32 L2A Series, Reference Manual, Page: 320 / 1379

Table 14-62. Kinetis Bootloader Status Error Codes, sorted by Value (continued)
Error Code Value Description
kStatus_I2C_SlaveRxOverrun 201 I2C Slave RX Overrun error.
kStatus_I2C_AribtrationLost 202 I2C Arbitration Lost error.
kStatus_SPI_SlaveTxUnderrun 300 SPI Slave TX Underrun error.
kStatus_SPI_SlaveRxOverrun 301 SPI Slave RX Overrun error.
kStatus_SPI_Timeout 302 SPI tranfser timed out.
kStatus_SPI_Busy 303 SPI instance is already busy performing a transfer.
kStatus_SPI_NoTransferInProgress 304 Attempt to abort a transfer when no transfer was in
progress.
kStatus_UnknownCommand 10000 The requested command value is undefined.
kStatus_SecurityViolation 10001 Command is disallowed because flash security is
enabled.
kStatus_AbortDataPhase 10002 Abort the data phase early.
kStatus_Ping 10003 Internal: received ping during command phase.
kStatusRomLdrSectionOverrun 10100 The loader has finished processing the SB file.
kStatusRomLdrSignature 10101 The signature of the SB file is incorrect.
kStatusRomLdrSectionLength 10102 The section length in chunks is invalid.
kStatusRomLdrUnencryptedOnly 10103 An encrypted SB file has been sent and decryption
support is not available.
kStatusRomLdrEOFReached 10104 The end of the SB file has been reached.
kStatusRomLdrChecksum 10105 The checksum of a command tag block is invalid.
kStatusRomLdrCrc32Error 10106 The CRC-32 of the data for a load command is
incorrect.
kStatusRomLdrUnknownCommand 10107 An unknown command was found in the SB file.
kStatusRomLdrIdNotFound 10108 There was no bootable section found in the SB file.
kStatusRomLdrDataUnderrun 10109 The SB state machine is waiting for more data.
kStatusRomLdrJumpReturned 10110 The function that was jumped to by the SB file has
returned.
kStatusRomLdrCallFailed 10111 The call command in the SB file failed.
kStatusRomLdrKeyNotFound 10112 A matching key was not found in the SB file's key
dictionary to unencrypt the section.
kStatusRomLdrSecureOnly 10113 The SB file sent is unencrypted and security on the
target is enabled.
kStatusRomLdrResetReturned 10114 The SB file reset operation has unexpectedly
returned.
kStatusMemoryRangeInvalid 10200 Memory range conflicts with a protected region.
kStatus_UnknownProperty 10300 The requested property value is undefined.
kStatus_ReadOnlyProperty 10301 The requested property value cannot be written.
kStatus_InvalidPropertyValue 10302 The specified property value is invalid.
kStatus_AppCrcCheckPassed 10400 CRC check is valid and passed.
kStatus_AppCrcCheckFailed 10401 CRC check is valid but failed.
kStatus_AppCrcCheckInactive 10402 CRC check is inactive.
Table continues on the next page...
Kinetis Bootloader Status Error Codes
K32 L2A Reference Manual, Rev. 2, 01/2020
320 NXP Semiconductors