Rohde & Schwarz 1323.0012.03, User Manual

Page: 495 / 1014

VNA GUI Reference
R&S
®
ZNL/ZNLE
495 User Manual 1178.5966.02 ─ 07
Use the complementary dock widget to create the required port sets and to activate or
deactivate dembedding/embedding for selected port sets (see
Chapter 9.14.1.4, "Port
Sets Panel" , on page 479).
Background information
Refer to Chapter 8.6.2.5, "Port Pair De-/Embedding" , on page 270 and Chap-
ter 8.6.2.6, "Port Set De-/Embedding" , on page 271.
If the "Fixture Simulator" is disabled for the related channel (see "Fixture Simulator"
on page 471), this tab is inactive, i.e. all controls except the "Overview" button are
grayed out.
Overview
See "Overview" on page 485.
Type
Switches between "Deembedding" and "Embedding" network definition.
Port Set
Port sets, defined in the complementary Port Sets Panel dock widget panel. The trans-
formation networks are defined such that the physical analyzer test ports are connec-
ted to the left of the circuit; the DUT ports are on the right side. You can define inde-
pendent transformation networks for all port sets.
The port set number, i.e. the number at the beginning of each "Port Set" item, corre-
sponds to the position of the port set in the
Port Sets Panel .
Remote command:
The port set number corresponds to the
<ListId>
numeric suffix in the port set de-/
embedding commands; see e.g.
CALCulate<Ch>:TRANsform:VNETworks:PPAir:
DEEMbedding<ListId>[:STATe]
.
Offset Embed Softtool
www.allice.de Allice Messtechnik GmbH