Rohde & Schwarz 1323.0012.03, User Manual

Page: 747 / 1014

Command Reference
R&S
®
ZNL/ZNLE
747 User Manual 1178.5966.02 ─ 07
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:X:OFFSet <StimulusOffset>
Shifts the trace
<WndTr>
in horizontal direction, leaving the positions of all markers
unchanged.
Suffix:
<Wnd>
.
Number of an existing diagram area (defined by means of
DISPlay[:WINDow<Wnd>][:STATe] ON
).
<WndTr> Existing trace number, assigned by means of
DISPlay[:
WINDow<Wnd>]:TRACe<WndTr>:FEED
.
Parameters:
<StimulusOffset> Stimulus offset value.
The range and unit depends on the sweep type.
Default unit: NN
Example: *RST; :DISP:WIND:TRAC:X:OFFS 1MHZ; :DISP:WIND:
TRAC:Y:OFFS 10
Create the default trace and shift it horizontally by 1 MHz, verti-
cally by 10 dB.
Manual operation: See "Stimulus" on page 356
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:Y[:SCALe]:AUTO <Activate>[,
<TraceName>]
Displays the entire trace in the diagram area, leaving an appropriate display margin.
The trace can be referenced either by its number
<WndTr>
or by its name
<TraceName>
.
Suffix:
<Wnd>
.
Number of an existing diagram area (defined by means of
DISPlay[:WINDow<Wnd>][:STATe] ON
). This suffix is ignored
if the optional
<TraceName>
parameter is used.
<WndTr> Existing trace number, assigned by means of
DISPlay[:
WINDow<Wnd>]:TRACe<WndTr>:FEED
. This suffix is ignored if
the optional
<TraceName>
parameter is used.
Setting parameters:
<Activate> ONCE
Activate the autoscale function.
<TraceName> Optional string parameter for the trace name, e.g. 'Trc4'. If this
optional parameter is present, both numeric suffixes are ignored
(trace names must be unique across different channels and win-
dows).
VNA Command Reference
www.allice.de Allice Messtechnik GmbH