Rohde & Schwarz 1323.0012.03, User Manual

Page: 335 / 1014

VNA GUI Reference
R&S
®
ZNL/ZNLE
335 User Manual 1178.5966.02 ─ 07
without associated memory trace, the current trace data are copied to a new mem-
ory trace, associated to this data trace.
●
"New" :
For each data trace, the current trace data are copied to a new memory trace,
associated to this data trace.
New memory traces are named "Mem<n>[<Data_Trace>]" with <n> selected by the
analyzer firmware to make trace names unique.
Remote command:
n/a
Show All Data / Hide All Data / Show All Mem / Hide All Mem
Displays or hides all data or memory traces in the active channel setup. Hidden traces
are not deleted.
Remote command:
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:SHOW
Delete All Mem
Deletes all memory traces in the active channel setup.
Tips:
●
Use the Trace Manager Dialog to hide or delete arbitrary sets of traces.
●
Use the UNDO function of the analyzer to restore a trace that was unintentionally
deleted.
Remote command:
CALCulate:PARameter:DELete:MEMory
9.6.5 Time Domain Tab
The "Time Domain" tab enables and configures the time domain representation of the
measurement results.
●
Time domain analysis requires option R&S ZNL-K2. If this option is not installed,
the "Time Domain" and Time Gate Tab tabs are hidden.
●
Since fimware version 1.30, this option is also available for the R&S ZNLE.
Background information
Refer to Chapter 8.7.1, "Time Domain Analysis" , on page 275.
For a comparison of the different transformation types and windows, and for applica-
tion examples, please also refer to the application note 1EZ44_OE (
https://www.rohde-
schwarz.com/appnote/1EZ44 ).
9.6.5.1 Controls on the Time Domain Tab
The contents of the "Time Domain" tab are also displayed on the "Meas" softtool for
non-frequency converting DUTs.
Trace Softtool
www.allice.de Allice Messtechnik GmbH