Rohde & Schwarz 1323.0012.03, User Manual

Page: 469 / 1014

VNA GUI Reference
R&S
®
ZNL/ZNLE
469 User Manual 1178.5966.02 ─ 07
Remote command:
[SENSe<Ch>:]CORRection:DATE?
[SENSe<Ch>:]CORRection:DATA:PARameter<Sfk>?
[SENSe<Chn>:]CORRection:SSTate?
9.13 Channel Softtool
The Channel functions select, create and delete channels and optimize the measure-
ment process.
Access: [Channel] hardkey
9.13.1 Channels Tab
Allows you to create and delete channels, to modify the channel state, and to select a
channel as the active channel.
You can monitor the channel activity using the
OUTPut<Ch>:UPORt[:VALue]
com-
mand and the output signals at pins 8 to 11 of the Aux. Port connector.
The Aux. Port is optional for the R&S
ZNL (requires R&S FPL1-B5). It is not available
for the R&S ZNLE.
Background information
Refer to Chapter 8.1.3.3, "Active and Inactive Traces and Channels" , on page 192.
9.13.1.1 Controls on the Channels Tab
The buttons in the "Channels" tab open the following dialogs:
●
"Channel Manager...": see Chapter 9.13.1.2, "Channel Manager Dialog" ,
on page 472
Channel Softtool
www.allice.de Allice Messtechnik GmbH