Command Reference
R&S
®
ZNL/ZNLE
701
User Manual 1178.5966.02 ─ 07
CALCulate<Ch>:TRANsform:VNETworks:DIFFerential:EMBedding<LogPt>:
PARameters:DATA
<Interchange>, <SParamTrcs>
Defines a
network for a balanced port based on the
given S-Parameter traces.
MMEMory:LOAD:VNETworks<Ch>:DIFFerential:EMBedding<LogPt>
to
load circuit data from a Touchstone file located at the R&S
ZNL/ZNLE's file system
instead.
Suffix:
<Ch>
.
Channel number
<LogPt>
Logical port number of a balanced port
Setting parameters:
<Interchange>
FPORts | IPORts | SGATes
FPORts (or omitted)
Standard port sequence (network port 1 towards VNA, network
port 2 towards DUT)
IPORts | SGATes
Inverted port sequence (network port 2 towards VNA, network
port 1 towards DUT)
<SParamTrcs>
<block_data>
Content of a two-port Touchstone file (
*.s2p
) in IEEE488.2
.
Usage:
Setting only
CALCulate<Ch>:TRANsform:VNETworks:DIFFerential:EMBedding<LogPt>:
PARameters:G<Cmp>
<CircuitModel>[, <Conductance>]
Specifies the conductance value G in the "Shunt L, Shunt C" lumped element model
for differential match embedding.
In the query form, the <Conductance> parameter must be omitted.
Suffix:
<Ch>
.
Channel number
<LogPt>
Logical port number (balanced port)
<Cmp>
Must be omitted or set to 1.
Parameters:
<CircuitModel>
SHLC
Currently only the "Shunt L, Shunt C" lumped element model is
supported
<Conductance>
Range:
-10 MS to 10 MS.
Increment: 1 μS (1E-6 F)
*RST:
0 S
Default unit: S(iemens)
VNA Command Reference
www.allice.de
Allice Messtechnik GmbH
