Rohde & Schwarz 1323.0012.03, User Manual

Page: 148 / 1014

Common Instrument Functions
R&S
®
ZNL/ZNLE
148 User Manual 1178.5966.02 ─ 07
Conductance in Embedding Networks
Changes the presentation of "capacitance C<i> in parallel with resistance R<i>" circuit
blocks in lumped de/embedding networks (see
Chapter 8.6.2.3, "Circuit Models for 2-
Port Networks" , on page 267 and Chapter 8.6.2.4, "Circuit Models for 4-Port Net-
works" , on page 268).
If active, the resistance R<i> is displayed and specified as conductance G<i> (=1/
R<i>).
Remote command:
SYSTem:DISPlay:CONDuctances
n/a
Pressing Hardkey Reactivates Softkey Bar
If the checkbox is selected (default), then pressing a function key displays the related
softtool and keeps the softkey bar open. Otherwise, if the softkey bar is hidden, it
appears only for a few seconds.
The softkey bar can be hidden using its close button or via display settings (see "Dis-
played Items" on page 125).
Decimal Places
Defines the number of fractional digits for quantities with different physical units. The
settings affect entries and results, e.g. the values in the marker lists.
Remote command:
n/a
Units Prefix
Sets the unit prefix for frequencies (Base unit: Hz) to kilo (k), mega (M), giga (G) or
tera (T) or lets the R&S
ZNL/ZNLE select the appropriate prefix ("Auto" = default set-
ting).
Remote command:
n/a
Reset Dialogs / Reset Decimal Places / Reset Units Prefix
Resets the dialog properties, the "Decimal Places" and the "Units Prefix" settings.
These settings are global and not affected by an instrument preset.
Note: Color settings are configured in "Display Theme and Colors" on page 128.
Remote command:
n/a
7.3.6.3 Advanced Tab
Collects several advanced settings.
General Instrument Setup
www.allice.de Allice Messtechnik GmbH