Rohde & Schwarz 1323.0012.03, User Manual

Page: 910 / 1014

Command Reference
R&S
®
ZNL/ZNLE
910 User Manual 1178.5966.02 ─ 07
TRIGger<Ch>[:SEQuence]:MULTiple:SLOPe<Num>
......................................................... 911
TRIGger<Ch>[:SEQuence]:MULTiple:SOURce
................................................................. 912
TRIGger<Ch>[:SEQuence]:SLOPe
.................................................................................. 913
TRIGger<Ch>[:SEQuence]:SOURce
................................................................................913
TRIGger<Ch>[:SEQuence]:HOLDoff <DelayTime>
Sets a delay time between the trigger event and the start of the measurement ("Trigger
Delay").
Suffix:
<Ch>
.
Channel number.
Parameters:
<DelayTime> Delay time.
Range:
0 s to 13680 s
Increment: 10 ms
*RST:
0 s
Default unit: s
Example: TRIG:SOUR MAN
Activate external trigger source.
TRIG:HOLD UP
Set a delay time of 10 ms.
Manual operation: See "Delay " on page 317
TRIGger<Ch>[:SEQuence]:LINK <MeasSequence>
Selects the triggered measurement sequence. The identifier for the sequence is a
string variable.
Suffix:
<Ch>
.
Channel number
Parameters:
<MeasSequence> Triggered measurement sequence, string variable.
'SWEep'
–
trigger event starts an entire sweep.
'SEGMent'
–
trigger event starts a sweep segment, if segmented
frequency sweep is active (see example below). If another
sweep type is active, the trigger event starts an entire sweep.
'POINt'
–
trigger event starts measurement at the next sweep
point.
'PPOint'
–
trigger event starts the next partial measurement at
the current or at the next sweep point.
*RST:
'SWEep'
VNA Command Reference
www.allice.de Allice Messtechnik GmbH