Command Reference
R&S
®
ZNL/ZNLE
765
User Manual 1178.5966.02 ─ 07
..................................................................................... 787
.......................................................................................787
.............................................................................................788
...............................................................................................789
...........................................................................................789
.............................................................................................. 789
................................................................................791
MMEMory:STORe:TRACe:OPTion:PLUS
......................................................................... 792
MMEMory:STORe:TRACe:OPTion:SSEParator
.................................................................792
MMEMory:STORe:TRACe:OPTion:TABS
......................................................................... 792
MMEMory:STORe:TRACe:OPTion:TRIM
..........................................................................793
................................................................................... 793
MMEMory:AKAL:FACTory:CONVersion
<Directory>
Converts the factory calibration data of the standards in the active calibration unit
(
SYSTem:COMMunicate:RDEVice:AKAL:ADDRess
) to Touchstone format and cop-
ies it to the specified directory.
Setting parameters:
<Directory>
String parameter to specify the directory.
Example:
MMEM:AKAL:FACTory:CONVersion 'C:\Users\Public\
Documents\Rohde-Schwarz\ZNL\AKAL\Touchstone'
Convert and copy the factory calibration data of the active cali-
bration unit to the specified (writable) directory.
Usage:
Setting only
Manual operation:
See
MMEMory:AKAL:USER:CONVersion
<Directory>[, <CalKitFile>]
Converts an arbitrary (e.g. user-defined) set of calibration data of the standards in the
active calibration unit (
SYSTem:COMMunicate:RDEVice:AKAL:ADDRess
) to Touch-
stone format and copies it to the specified directory.
Setting parameters:
<Directory>
String parameter to specify the directory.
<CalKitFile>
Name and (possibly) directory of the cal kit file to be used for the
automatic calibration (optional string parameter):
–
If the parameter is omitted, the analyzer uses the last charac-
terized cal kit file.
–
If an empty string (
' '
) is specified, the factory cal kit file
stored in the active calibration unit (
) is used. By default this file is also
used in manual control.
–
A cal kit file name
*.calkit
without path denotes a specific
cal kit file stored in the active calibration unit.
VNA Command Reference
www.allice.de
Allice Messtechnik GmbH
