manualshive.com logo in svg

Rohde & Schwarz 1323.0012.03, User Manual

Share
Download
Rohde & Schwarz 1323.0012.03 User Manual Download Page 64

Getting Started

R&S

®

 ZNL/ZNLE

64

User Manual 1178.5966.02 ─ 07

Figure 5-6: Zoomed display around a peak

5.3.3

 

Saving Settings

To restore the results of our measurements later, we will store the instrument settings
to a file.

To save the instrument settings to a file

1. Tap the "Save" icon in the toolbar.

2. Press the keyboard key on the front panel to display the online keyboard, as you

will have to enter text in the next step.

3. In the "Save" dialog box, tap the "File name" field and enter 

MyMultiViewSetup

using the keyboard.
Keep the default "File Type" setting "Instrument with all Channel Setups" to store
the configuration of all channel setups.

Trying Out the Instrument

www.allice.de 

Allice Messtechnik GmbH 

Summary of Contents for 1323.0012.03























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands