manualshive.com logo in svg

Rohde & Schwarz 1323.0012.03, User Manual

Share
Download
Rohde & Schwarz 1323.0012.03 User Manual Download Page 551

Command Reference

R&S

®

 ZNL/ZNLE

551

User Manual 1178.5966.02 ─ 07

Example: 

DISP:TIME ON

Switches the screen display of date and time on.

DISP:TIME:FORM US

Switches the date and time format to US.

Manual operation: 

See 

" Date and Time Format "

 

on page 125

SYSTem:DISPlay:FPANel[:STATe] 

<State>

This command includes or excludes the front panel keys when working with the remote
desktop.

Parameters:

<State>

ON | OFF | 0 | 1
*RST: 

1

Manual operation: 

See 

"Front Panel"

 

on page 127

Colors and Themes

Useful commands to customize display colors described elsewhere

The 

HCOPY

 commands define the print colors and thus only take effect on the display

colors, if the display shows the printing colors.

●

HCOPy:CMAP<it>:DEFault<ci>

 

on page 531

Remote commands exclusive to customize the display colors and themes

DISPlay:CMAP<it>:DEFault<ci>

...................................................................................... 551

DISPlay:THEMe:CATalog?

.............................................................................................. 552

DISPlay:THEMe:SELect

................................................................................................. 552

DISPlay:CMAP<it>:DEFault<ci>

This command resets the color scheme for the display. The query returns the default
color scheme.

Suffix: 

<it>

.

Irrelevant.

<ci>

1
Current colors with a white background and a black grid.
2
Optimized colors.
4
Current screen colors (setting for hardcopies).
Suffix irrelevant for query

Return values: 

<DefScheme>

1 | 2 | 3 | 4
The default color scheme for the selected item, as specified by
the <ci> suffix.

Common Instrument Commands

www.allice.de 

Allice Messtechnik GmbH 

Summary of Contents for 1323.0012.03























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands