Rohde & Schwarz 1323.0012.03, User Manual

Page: 483 / 1014

VNA GUI Reference
R&S
®
ZNL/ZNLE
483 User Manual 1178.5966.02 ─ 07
Note: The loaded S-parameter trace is stored in the active channel setup. Persisted
channel setups contain the full embedding and deembedding data so that they can be
transferred to other instruments.
Remote command:
MMEMory:LOAD:VNETworks<Ch>:GLOop:DEEMbedding
MMEMory:LOAD:VNETworks<Ch>:GLOop:EMBedding
9.14.1.7 Impedance Renormalization Panel
This panel provides alternative access to the reference impedance settings (see "Ref-
erence Impedance Tab" on page 369).
Access: Overview Panel > "Impedance Renor."
Active
The "Active" flags are inversely related to the Use Default flags of the logical port con-
figuration (see Balanced Ports Dialog ).
"Active" "Use Default"
☑ ☐
☐ ☑
9.14.1.8 Differential Match Panel
This panel allows you to activate or deactivate differential match embedding.
Access: Overview Panel > "Differential Match"
For the "2-Port Data" network type, the required touchstone file can also be selected
from here ("...").
If necessary, use the button on the right hand side to open the Balanced Ports Dialog
and change the balanced port configuration.
Offset Embed Softtool
www.allice.de Allice Messtechnik GmbH