VNA GUI Reference
R&S
®
ZNL/ZNLE
362
User Manual 1178.5966.02 ─ 07
If checked, a selected trace S
ij
is imported as a memory trace for all data traces in the
current channel setup that are measuring S
ij
.
Remote command:
9.6.11.4
Select Ports Dialog
The "Select Ports" dialog defines the port assignment for the created Touchstone
(
*.s<n>p
) file.
Access:
[Trace] > "Trace Data" > "snp Free Config..."
Touchstone files and file export
Note the conditions described in
"Conditions for Touchstone file export"
Checks and Messages in the Dialog
After each port or channel selection, the R&S
ZNL/ZNLE checks the channel data for
compatibility with the trace export conditions. If data from "All Channels" are exported,
every channel must contain a compatible set of traces; see
The "OK" button is available only if no error message is displayed in the dialog.
Select / Select All / Deselect All
Selects the ports to be considered for the S-parameter export.
Example:
With ports 1 and 2 selected, S-parameters S
11
, S
12
, S
21
and S
22
are expor-
ted.
Remote command:
Assign
Selects the port number assignment in the created
*.s<n>p
file. By default, analyzer
and
*.s<n>p
port numbers are identical. You can interchange the port assignment to
change the order of the S-parameters in the created ´Touchstone file. Each of the ana-
lyzer port numbers must be assigned to one
*.s<n>p
port number.
Trace Softtool
www.allice.de
Allice Messtechnik GmbH
