Rohde & Schwarz 1323.0012.03, User Manual

Page: 122 / 1014

Common Instrument Functions
R&S
®
ZNL/ZNLE
122 User Manual 1178.5966.02 ─ 07
c) Check the "Print Preview" to make sure all relevant elements of the display are
visible.
8. In the "Color" tab, define the colors to be used for the printout.
a) By default, "Optimized Colors" are used to improve the visibility of the colors.
The background is always printed in white and the grid in black.
For a printout that reflects the colors you see on the screen, but with a white
background, select "Screen Colors (Print)".
b) Check the "Print Preview" to find out if the setting is appropriate.
9. Select "Print" to execute the print function.
10. If you did not select the option to suppress the dialog, enter a filename in the file
selection dialog box.
The selected data elements are stored to the file as configured.
11. To store another file using the same configuration any other time, simply press the
"Print immediate" icon at the far right end of the toolbar.
7.3 General Instrument Setup
Access : [SETUP]
Some basic instrument settings can be configured independently of the selected oper-
ating mode or application. Usually, you configure most of these settings initially when
you set up the instrument according to your personal preferences or requirements.
Then you only adapt individual settings to special circumstances when necessary.
Some special functions are provided for service and basic system configuration.
Network and remote settings
Settings for network and remote operation are described in Chapter 7.4.4, "Network
and Remote Control Settings" , on page 159.
Settings for the optional "Spectrum" mode are described in the R&S ZNL/ZNLE "Spec-
trum" mode user manual.
● Reference Frequency ............................................................................................122
● Display Settings .................................................................................................... 123
● Language Settings ................................................................................................ 132
● System Configuration Settings ..............................................................................133
● Service Functions ..................................................................................................139
● VNA Setup ............................................................................................................ 144
7.3.1 Reference Frequency
Access : [Setup] > "Reference Int/Ext"
General Instrument Setup
www.allice.de Allice Messtechnik GmbH