Rohde & Schwarz 1323.0012.03, User Manual

Page: 548 / 1014

Command Reference
R&S
®
ZNL/ZNLE
548 User Manual 1178.5966.02 ─ 07
Return values:
<Temperature> Temperature in degrees Celsius.
Example: SOUR:TEMP:FRON?
Queries the temperature of the frontend sensor.
10.3.4.3 Customizing the Screen Layout
The remote commands required to set up the display of the R&S ZNL/ZNLE are descri-
bed here.
● General Display Settings and Items ......................................................................548
● Colors and Themes ...............................................................................................551
General Display Settings and Items
The following commands add, remove or customize general display and screen ele-
ments.
Remote commands exclusive to general display settings
DISPlay:ANNotation:CBAR
............................................................................................. 548
DISPlay:BLIGhting
......................................................................................................... 548
DISPlay:ANNotation:FREQuency
.....................................................................................549
DISPlay:SBAR[:STATe]
...................................................................................................549
DISPlay:SKEYs[:STATe]
................................................................................................. 549
DISPlay:TBAR[:STATe]
................................................................................................... 549
DISPlay:TOUChscreen[:STATe]
....................................................................................... 550
DISPlay[:WINDow<n>]:TIME
...........................................................................................550
DISPlay[:WINDow<n>]:TIME:FORMat
..............................................................................550
SYSTem:DISPlay:FPANel[:STATe]
................................................................................... 551
DISPlay:ANNotation:CBAR <State>
This command hides or displays the channel bar information.
Parameters:
<State> ON | OFF | 0 | 1
*RST:
1
Example: DISP:ANN:CBAR OFF
Manual operation: See "Channel Bar" on page 126
DISPlay:BLIGhting <Brightness>
Changes the brightness of the display in eight steps.
Parameters:
<Brightness> integer
Range:
0 to 7
*RST: 3
Common Instrument Commands
www.allice.de Allice Messtechnik GmbH