Rohde & Schwarz 1323.0012.03, User Manual

Page: 142 / 1014

Common Instrument Functions
R&S
®
ZNL/ZNLE
142 User Manual 1178.5966.02 ─ 07
Alternatively to the RF input signal from the front panel connector you can use the
instrument's calibration signal as the input signal, for example to perform service func-
tions on.
NONE .........................................................................................................................142
Calibration Frequency RF ........................................................................................... 142
└ Frequency ..................................................................................................... 142
NONE
Uses the current RF signal at the input, i.e. no calibration signal (default).
Remote command:
DIAGnostic:SERVice:INPut[:SELect]
on page 547
Calibration Frequency RF
Uses the internal calibration signal as the RF input signal.
Remote command:
DIAGnostic:SERVice:INPut[:SELect]
on page 547
DIAGnostic:SERVice:INPut:PULSed:CFRequency
on page 545
Frequency ← Calibration Frequency RF
Defines the frequency of the internal broadband calibration signal to be used for IF fil-
ter calibration (max. 64
MHz).
7.3.5.4 Service Functions
Access : [Setup] > "Service" > "Service Function"
General Instrument Setup
www.allice.de Allice Messtechnik GmbH