Command Reference
R&S
®
ZNL/ZNLE
946
User Manual 1178.5966.02 ─ 07
MMEMory:STORe:TRACe 'Trc1', 'S21.s1p'
MMEMory:LOAD:TRACe 'Trc1', 'S21.s1p'
// Alternative, more compact definition
MMEMory:CDIRectory DEFault
MMEMory:STORe:TRACe 'Trc1', 'Traces\S21.s1p'
You may also read the default path (
MMEMory:CDIRectory?
) and use the external
RC program to build the complete paths.
10.6.2.2
Trace and Diagram Handling
The following sections provide examples for efficient channel and trace definition and
convenient diagram handling.
Assigning Channels, Traces, and Diagrams
The following example is a short version of
Chapter 10.6.1.2, "Channel, Trace and Dia-
// Reset the analyzer
*RST
// Create a new trace for S21 with the name TrcDisp
:CALCULATE1:PARAMETER:SDEFINE "TrcDisp","S21"
// Display the trace in the display area 1
:DISPLAY:WINDOW1:TRACE9:FEED 'TrcDisp'
:DISPLAY:WINDOW1:TRACE9:DELETE
// List the traces, assigned to a certain Channel
// format "<trace name>,<meas param>[,<trace name>,<meas param>...]"
:CALCULATE1:PARAMETER:CATALOG?
// Channel 4 does not exist, a new channel and trace is created
:CALCULATE4:PARAMETER:SDEFINE "Ch4Trc2","S22"
:CALCULATE4:PARAMETER:SDEFINE "Ch4Trc3","S33"
:CALCULATE4:PARAMETER:CATALOG?
// Select active traces for channel 4
:CALCULATE4:PARAMETER:SELECT "Ch4Trc2"
:CALCULATE4:PARAMETER:SELECT?
//:CALCULATE4:FORMAT POLAR
:CALCULATE4:PARAMETER:SELECT "Ch4Trc3"
//:CALCULATE4:FORMAT DB_LIN
:CALCULATE4:PARAMETER:SELECT?
:CALCULATE4:PARAMETER:SELECT "Ch4Trc2"
:CALCULATE4:FORMAT?
VNA Programming Examples
www.allice.de
Allice Messtechnik GmbH
