Command Reference
R&S
®
ZNL/ZNLE
903
User Manual 1178.5966.02 ─ 07
<Type>
THRough | OPEN | SHORt | MATCh | MMTHrough |
MFTHrough | FFTHrough | MOPen | FOPen | MSHort | FSHort |
MMTCh | FMTCh
Standard types; for a description refer to table
. The standard types of a particular charac-
RDEVice:AKAL:CKIT:STANdard:CATalog?
The factory characterization usually does not contain data for a
through standard; therefore a query of the type
SYSTem:COMMunicate:RDEVice:AKAL:SDATa?
'Factory', THR, S11, 1, 2
results in an error message.
<SParameter>
S11 | S12 | S21 | S22
S-parameter of the standard, use
S11
for one-port standards,
one of the four for 2-port standards.
<FirstPort>
First port number (sufficient for one-port standards). Port num-
bers can be omitted if the cal kit data is valid for all ports; see
<SecondPort>
Second port number, for two-port standards. Port numbers can
be omitted if the cal kit data is valid for all ports.
Example:
SYSTem:COMMunicate:RDEVice:AKAL:CKIT:
Usage:
Query only
Manual operation:
SYSTem:COMMunicate:RDEVice:AKAL:WARMup[:STATe]?
Queries the warmup state of the connected calibration unit R&S ZV_Z5x. If several cal
units are USB-connected to the analyzer, the command queries the cal unit selected
via
SYSTem:COMMunicate:RDEVice:AKAL:ADDRess
.
Possible responses are
1
(true, if the calibration unit has been connected for a suffi-
cient time to rach its operating temperature) or
0
(false).
0
is also returned if no calibra-
tion unit is connected.
Example:
SYSTem:COMMunicate:RDEVice:AKAL:CKIT:
Usage:
Query only
Manual operation:
SYSTem... (Contd.)
The following
SYSTem...
commands provide general instrument configurations.
....................................................................................904
VNA Command Reference
www.allice.de
Allice Messtechnik GmbH
