VNA GUI Reference
R&S
®
ZNL/ZNLE
493
User Manual 1178.5966.02 ─ 07
If the "Fixture Simulator" is disabled for the related channel (see
on page 471), this tab is inactive, i.e. all controls except the "Overview" button are
grayed out.
Overview
See
Type
Switches between "Deembedding" and "Embedding" network definition.
Port
Physical port. The transformation networks are defined such that the analyzer is con-
nected to the left of the circuit while the DUT is connected to the right side. You can
define independent transformation networks for all ports.
Remote command:
The
<PhyPt>
numeric suffix in the embedding/deembedding commands identifies the
physical port; see e.g.
CALCulate<Ch>:TRANsform:VNETworks:SENDed:
CALCulate<Ch>:TRANsform:VNETworks:
SENDed:EMBedding<PhyPt>[:STATe]
Network
The graphical list contains all available 2-port networks:
●
The symbol selects "no network" and disables single-ended de-/embedding.
●
The "2-Port Data" network is defined by means of imported S-parameter data; see
●
The remaining networks are defined by lumped elements. Their parameters are
displayed below the graphical list.
Tip:
Drag and drop the network symbols in horizontal or vertical direction to switch to
the next symbol. The lumped elements are numbered from top to bottom.
Offset Embed Softtool
www.allice.de
Allice Messtechnik GmbH
