Rohde & Schwarz 1323.0012.03, User Manual

Page: 529 / 1014

Command Reference
R&S
®
ZNL/ZNLE
529 User Manual 1178.5966.02 ─ 07
MMEMory:STORe<n>:TYPE <Mode>
This command defines whether the data from the entire instrument or only from the
current channel setup is stored with the subsequent
MMEM:STOR
... command.
Suffix:
<n>
.
irrelevant
Parameters:
<Mode> INSTrument | CHANnel
INSTrument
Stores data from the entire instrument.
CHANnel
Stores data from an individual channel setup.
*RST:
INST
Example: INST:SEL 'SPECTRUM2'
Selects channel setup
'SPECTRUM2'
.
MMEM:STOR:TYPE CHAN
Specifies that channel setup data is to be stored.
SYSTem:PRESet
This command presets the R&S ZNL/ZNLE. It is identical to
*RST
.
Example: SYST:PRES
Usage: Event
SYSTem:PRESet:CHANnel[:EXEC]
This command restores the default instrument settings in the current channel setup.
Use
INST:SEL
to select the channel setup.
For details see Chapter 7.2.1, "Restoring the Default Instrument Configuration (Pre-
set)" , on page 101.
Example: INST:SEL 'Spectrum2'
Selects the channel setup for "Spectrum2".
SYST:PRES:CHAN:EXEC
Restores the factory default settings to the "Spectrum2" channel
setup.
Usage: Event
10.3.3.3 Storing or Printing Screenshots
Useful commands to configure screenshots described elsewhere
●
MMEMory:NAME
on page 523
Common Instrument Commands
www.allice.de Allice Messtechnik GmbH