Rohde & Schwarz 1323.0012.03, User Manual

Page: 628 / 1014

Command Reference
R&S
®
ZNL/ZNLE
628 User Manual 1178.5966.02 ─ 07
Example: Suppose that the active channel setup contains an active trace
no. 1.
CALC:MARK ON
Create marker M1 and assign it to trace no. 1.
CALC:MARK:FUNC:EXEC MAX; RES?
Move the created marker to the absolute maximum of the trace
and query the stimulus and response value of the search result.
Usage: Setting only
Manual operation: See "Max / Min" on page 425
The analyzer provides the following search modes:
Mode Find...
MAXimum Absolute maximum in the search range (see CALCulate<Chn>:MARKer<Mk>:
FUNCtion:DOMain:USER[:RANGe]
)
MINimum Absolute maximum in the search range
RPEak Next valid peak to the right of the current marker position
LPEak Next valid peak to the left
NPEak Next highest or lowest value among the valid peaks (next peak)
TARGet Target value (see
CALCulate<Chn>:MARKer<Mk>:TARGet
)
RTARget Next target value to the right of the current marker position
LTARget Next target value to the left
BFILter Bandfilter search. The results are queried using
CALCulate<Chn>:MARKer<Mk>:
BWIDth
.
MMAXimum or
MMINimum Multiple peak search
SPRogress Sweep progress
CALCulate<Chn>:MARKer<Mk>:FUNCtion:RESult?
Returns the result (stimulus and response value) of a search started by means of
CALCulate<Chn>:MARKer<Mk>:FUNCtion:EXECute
. The search must be execu-
ted before the command is enabled.
Suffix:
<Chn>
.
Channel number used to identify the active trace
<Mk> This numeric suffix is ignored and may be set to any value.
Example: See
CALCulate<Chn>:MARKer<Mk>:FUNCtion:EXECute
Usage: Query only
Manual operation: See "Max / Min" on page 425
VNA Command Reference
www.allice.de Allice Messtechnik GmbH