manualshive.com logo in svg

Rohde & Schwarz 1323.0012.03, User Manual

Share
Download
Rohde & Schwarz 1323.0012.03 User Manual Download Page 286

VNA Concepts and Features

R&S

®

 ZNL/ZNLE

286

User Manual 1178.5966.02 ─ 07

This option is not available for the R&S

 

ZNLE.

8.7.12

 

Internal Li-Ion Batteries

R&S

 

FPL1-B31

With the Li-ion battery pack (option R&S

 

FPL1-B31), the R&S

 

ZNL can be operated

independently of an AC or DC power supply. The instrument can house 2 Li-Ion batter-
ies which can be charged both via AC or DC power supply.

This option is not available for the R&S

 

ZNLE. For the R&S

 

ZNL, it can be retrofitted by

Rohde&Schwarz service.

Optional Extensions and Accessories

www.allice.de 

Allice Messtechnik GmbH 

Summary of Contents for 1323.0012.03























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands