manualshive.com logo in svg

Rohde & Schwarz 1323.0012.03, User Manual

Share
Download
Rohde & Schwarz 1323.0012.03 User Manual Download Page 156

Common Instrument Functions

R&S

®

 ZNL/ZNLE

156

User Manual 1178.5966.02 ─ 07

The navigation pane of the browser interface contains the following elements:

●

"LXI"
–

"Home" opens the instrument home page.
The home page displays the device information required by the LXI standard,
including the VISA resource string in read-only format.
The "Device Indicator" button allows you to physically identify the instrument.
This is useful if you have several instruments and want to know which instru-
ment the LXI home page belongs to. To identify the instrument, activate the
"Device Indicator". Then check the "LAN Status" indicator of the instruments.

–

"LAN Configuration" allows you to configure LAN parameters and to initiate a
ping.
(See 

"Ping Client"

 

on page 176.)

(See

–

"Status Bar" displays information about the LXI status of the instrument.

–

"Utilities" provides access to the LXI event log functionality required by the LXI
standard.

●

"Instrument Control"
–

"Web Control" provides remote access to the instrument via VNC (no installa-
tion required). Manual instrument controls are available via the front panel sim-
ulation.

–

"File Download" downloads files from the instrument.

Network and Remote Settings

www.allice.de 

Allice Messtechnik GmbH 

Summary of Contents for 1323.0012.03























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands