Rohde & Schwarz 1323.0012.03, User Manual

Page: 625 / 1014

Command Reference
R&S
®
ZNL/ZNLE
625 User Manual 1178.5966.02 ─ 07
Parameters:
<OutFormat> DEFault | MLINear | MLOGarithmic | MDB | PHASe | POLar |
COMPlex | GDELay | REAL | IMAGinary | SWR | LINPhase |
MLPHase | LOGPhase | MDPHase | IMPedance | ADMittance |
MIMPedance
Note that in contrast to previous releases
DEFault
now means
the marker is formatted according the related trace's default
marker format (see
CALCulate<Chn>:MARKer:DEFault:
FORMat
), which may not be set to
DEFault
(= trace format).
For the other marker formats see
CALCulate<Chn>:MARKer:
DEFault:FORMat
and the description in "Marker Format"
on page 201.
*RST:
DEFault
Manual operation: See "Marker Format" on page 419
CALCulate<Chn>:MARKer<Mk>:FUNCtion:BWIDth:MODE <BandfilterType>
Selects the bandfilter search mode. In contrast to manual control, bandfilter tracking is
not automatically activated.
Suffix:
<Chn>
.
Channel number used to identify the active trace
<Mk> This numeric suffix is ignored and may be set to any value
because the bandfilter search functions always use markers M1
to M4.
Parameters:
<BandfilterType> BPASs | BSTop | BPRMarker | BSRMarker | BPABsolute |
BSABsolute | NONE
Bandfilter search type:
BPASs
–
Bandpass Search Ref to Max
BSTop
–
Bandstop Search Ref to Max
BPRMarker
–
Bandpass Search Ref to Marker
BSRMarker
–
Bandstop Search Ref to Marker
BPABsolute
–
Bandpass Absolute Level
BSABsolute
–
Bandstop Absolute Level
NONE
–
deactivate bandfilter search, result off
*RST: NONE
Example: See
CALCulate<Chn>:MARKer<Mk>:BWIDth
Manual operation: See "Bandpass Ref to Max" on page 435
CALCulate<Chn>:MARKer<Mk>:FUNCtion:CENTer
Sets the center of the sweep range equal to the stimulus value of the marker
<Mk>
on
trace no.
<Chn>
.
VNA Command Reference
www.allice.de Allice Messtechnik GmbH