manualshive.com logo in svg

Rohde & Schwarz 1323.0012.03, User Manual

Share
Download
Rohde & Schwarz 1323.0012.03 User Manual Download Page 68

Getting Started

R&S

®

 ZNL/ZNLE

68

User Manual 1178.5966.02 ─ 07

d) Drag the "Real/Imag (I/Q)" icon from the evaluation bar to the SmartGrid.

Figure 5-9: Inserting a Real/Imag diagram for I/Q analysis

e) Close the SmartGrid mode.

The "IQ Analyzer" channel setup displays the real and imaginary signal parts in
separate windows.

To display the MultiView tab

An overview of all active channel setups is provided in the "MultiView" tab. This tab is
always displayed if more than one channel setup is active and cannot be closed.

► Tap the "MultiView" tab.

Trying Out the Instrument

www.allice.de 

Allice Messtechnik GmbH 

Summary of Contents for 1323.0012.03























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands