Rohde & Schwarz 1323.0012.03, User Manual

Page: 700 / 1014

Command Reference
R&S
®
ZNL/ZNLE
700 User Manual 1178.5966.02 ─ 07
Parameters:
<CircuitModel> FIMPort | STSL | STSC | SLST | SCST | CSSL | LSSC | CSSC |
LSSL | SLCS | SCLS | SCCS | SLLS | STSG | SGST | GSSL |
LSSG | GSSG | SLGS | SGLS | SGGS
Possible circuit models (character data); see
Table 10-9 .
*RST: CSSL
Example: See
CALCulate<Ch>:TRANsform:VNETworks:BALanced:
EMBedding<LogPt>[:STATe]
Manual operation: See "Network" on page 498
CALCulate<Ch>:TRANsform:VNETworks:DIFFerential:EMBedding<LogPt>[:
STATe] <Boolean>
Enables or disables differential match embedding for balanced port <LogPt>.
Suffix:
<Ch>
.
Channel number
<LogPt> Logical port number (balanced port)
Parameters:
<Boolean> ON | OFF - embedding active or inactive
*RST:
OFF
Manual operation: See "Active" on page 484
CALCulate<Ch>:TRANsform:VNETworks:DIFFerential:EMBedding<LogPt>:
PARameters:C<Cmp> <CircuitModel>[, <Capacitance>]
Specifies the capacitance value C in the "Shunt L, Shunt C" lumped element model for
differential match embedding.
In the query form, the <Capacitance> parameter must be omitted.
Suffix:
<Ch>
.
Channel number
<LogPt> Logical port number (balanced port)
<Cmp> Must be omitted or set to 1.
Parameters:
<CircuitModel> SHLC
Currently only the "Shunt L, Shunt C" lumped element model is
supported
<Capacitance> Range: -1mF to 1 mF.
Increment: 1 fF (1E-15 F)
*RST:
1 pF (1E-12 F)
Default unit: F
Manual operation: See "Network" on page 502
VNA Command Reference
www.allice.de Allice Messtechnik GmbH