Rohde & Schwarz 1323.0012.03, User Manual

Page: 734 / 1014

Command Reference
R&S
®
ZNL/ZNLE
734 User Manual 1178.5966.02 ─ 07
CONFigure:TRACe:WINDow:TRACe? <TraceName>
Returns the number of the diagram which the trace
<TraceName>
is assigned to. A
zero is returned when the trace is not assigned/displayed.
The diagram number is equal to the
<Wnd>
suffix in
DISPlay[:WINDow<Wnd>]:
TRACe<WndTr>:FEED
and similar commands; see example.
Query parameters:
<TraceName> Trace name (string), e.g.
'Trc1'
Example: *RST; :CALC:PAR:SDEF 'Trc2', 'S11'
Create a trace named Trc2.
CONF:TRAC:WIND:TRAC? 'Trc2'
Query the diagram number for Trc2. The new trace is not dis-
played, so the response is
0
.
DISP:WIND2:STAT ON
Create a diagram no. 2.
DISP:WIND2:TRAC3:FEED 'Trc2'
Display the trace in the new diagram no. 2, assigning the trace
number 3.
CONF:TRAC:WIND? 'Trc2'
Query the diagram number for Trc2. The response is
2
.
CONF:TRAC:WIND:TRAC? 'Trc2'
Query the trace number for Trc2. The response is
3
.
Usage: Query only
Manual operation: See "Table Area" on page 324
CONFigure:TRACe<Trc>:CHANnel:NAME? <TraceName>
Queries the channel name for an existing trace named
'<TraceName>'
.
Suffix:
<Trc>
.
Trace number. This suffix is ignored; the trace is referenced by
its name.
Query parameters:
<TraceName> Trace name, e.g.
'Ch2Trc2'
.
Example: See
CONFigure:TRACe:CATalog?
Usage: Query only
Manual operation: See "New Channel" on page 470
CONFigure:TRACe<Trc>:CHANnel:NAME:ID? <TraceName>
Queries the channel number (numeric suffix) for an existing trace named
'<TraceName>'
.
VNA Command Reference
www.allice.de Allice Messtechnik GmbH