Getting Started
R&S
®
ZNL/ZNLE
28
User Manual 1178.5966.02 ─ 07
Risk of losing data
If you switch off the running instrument using the rear panel switch or by disconnecting
the power cord, and no (charged) battery is available, the instrument loses its current
settings. Furthermore, program data may be lost.
Press the Power key first to shut down the application properly.
5.1.1.9
Checking the Supplied Options
The instrument may be equipped with both hardware and firmware options. To check
whether the installed options correspond to the options indicated on the delivery note,
proceed as follows.
1. Press the [SETUP] key.
2. Press the "System Config" softkey.
3. Switch to the "Ve Options" tab in the "System Configuration" dialog.
A list with hardware and firmware information is displayed.
4. Check the availability of the hardware options as indicated in the delivery note.
5.1.2
Windows Operating System
The instrument contains the Windows operating system which has been configured
according to the instrument's features and needs. Changes in the system setup are
only required when peripherals like keyboard or a printer are installed or if the network
configuration does not comply with the default settings. After the R&S
ZNL/ZNLE is
started, the operating system boots and the instrument firmware is started automati-
cally.
To ensure that the instrument software functions properly, certain rules must be
adhered to concerning the operating system.
Risk of rendering instrument unusable
The instrument is equipped with the Windows operating system. You can install addi-
tional software on the instrument, however, additional software can impair instrument
function. Thus, run only programs that Rohde
&
Schwarz has tested for compatibility
with the instrument software.
The drivers and programs used on the instrument under Windows are adapted to the
instrument. Only install update software released by Rohde
&
Schwarz to modify exist-
ing instrument software.
Preparing for Use
www.allice.de
Allice Messtechnik GmbH
