Rohde & Schwarz 1323.0012.03, User Manual

Page: 634 / 1014

Command Reference
R&S
®
ZNL/ZNLE
634 User Manual 1178.5966.02 ─ 07
Example: Suppose that the active channel setup contains an active trace
no. 1 and that the sweep range for a frequency sweep starts at 1
GHz.
CALC:MARK:REF ON
Create the reference marker and display it in the center of the
sweep range.
CALC:MARK:REF:X 1GHz
Set the reference marker to the beginning of the sweep range.
CALC:MARK:REF:Y?
Query the measurement value at the reference marker position.
Manual operation: See "Mkr <i> Stimulus / Ref Mkr Stimulus" on page 416
CALCulate<Chn>:MARKer<Mk>:REFerence:Y <RefResponseValue>
Sets or gets the (response) value of the related reference marker.
The marker must be created before using
CALCulate<Chn>:MARKer<Mk>:
REFerence[:STATe] ON
.
Setting this value is only possible in ARBitrary mode (see
CALCulate<Chn>:
MARKer<Mk>:REFerence:TYPE
. For NORMal and FIXed mode markers it is read-
only.
Suffix:
<Chn>
.
Channel number used to identify the active trace
<Mk> This numeric suffix is ignored and may be set to any value.
Parameters:
<RefResponseValue> See
CALCulate<Chn>:MARKer<Mk>:Y
Default unit: NN
Example: See
CALCulate<Chn>:MARKer<Mk>:REFerence:X
Manual operation: See "Mkr <i> Arb. Response / Ref Mkr Arb. Response"
on page 416
CALCulate<Chn>:MARKer<Mk>:SEARch:TRACking <Boolean>
This command is only available if a search mode is active (
CALCulate<Chn>:
MARKer<Mk>:FUNCtion:EXECute ...
)
It enables or disables tracking, which causes the search logic of the related marker(s)
to be repeated after each sweep.
Tip: If the current search mode is a bandfilter or multiple peak search this command
enables or disables the corresponding tracking.
Suffix:
<Chn>
.
Channel number used to identify the active trace
VNA Command Reference
www.allice.de Allice Messtechnik GmbH