Rohde & Schwarz 1323.0012.03, User Manual

Page: 103 / 1014

Common Instrument Functions
R&S
®
ZNL/ZNLE
103 User Manual 1178.5966.02 ─ 07
● Quick Save/Quick Recall .......................................................................................103
● Configurable Storage and Recall .......................................................................... 105
● How to Save and Load Instrument Settings ..........................................................109
7.2.2.1 Quick Save/Quick Recall
The Quick Save and Quick Recall functions allow you to store instrument settings or
channel setups very easily and quickly in one step. Up to ten different sets of settings
can be stored to or recalled from "save sets". Each save set is identified by its storage
date and type (instrument or specific "Channel") in the display. The save sets are
stored in the
C:\Users\Public\Documents\Rohde-Schwarz\ZNL\user\QuickSave
direc-
tory, in files named
QuickSave1.dfl
to
QuickSave10.dfl
. The storage filenames
and locations cannot be changed. Only the current measurement settings are stored,
not any additional data such as traces, limit line or transducer files (see
"Stored Data
Types" on page 105).
During recall, save sets of type "Instrument" replace the settings of the entire instru-
ment. All other save sets start a new channel setup with the stored settings.
If a channel setup with the same name as the "Channel" to be restored is already
active, the name for the new channel setup is extended by a consecutive number:
Quick Save / Quick Recall Settings
Access : "Save"/ "Open" icon in the toolbar > "Quick Save" / "Quick Recall"
Both dialog boxes are very similar and closely related.
Data Management
www.allice.de Allice Messtechnik GmbH