Rohde & Schwarz 1323.0012.03, User Manual

Page: 105 / 1014

Common Instrument Functions
R&S
®
ZNL/ZNLE
105 User Manual 1178.5966.02 ─ 07
Note: After you use the "Recall" function, the history of previous actions is deleted, i.e.
any actions performed previously cannot be undone or redone using the [UNDO/
REDO] keys.
Remote command:
MMEMory:LOAD:STATe
on page 526
7.2.2.2 Configurable Storage and Recall
The more sophisticated storage and recall functions allow you to define which settings
are stored, and where the settings file is stored to. Any settings file can be selected for
recall.
● Stored Data Types ................................................................................................ 105
● Storage Location and Filename ............................................................................ 105
● Save and Recall Dialog Boxes ..............................................................................105
● Startup Recall Settings ..........................................................................................107
Stored Data Types
The following types of data can be stored to and loaded from files via the "Save" dialog
box on the R&S
ZNL/ZNLE:
Table 7-1: Items that can be stored to files
Item Description
Current Settings Current instrument and measurement settings.
Storage Location and Filename
The data is stored on the internal flash disk or, if selected, on a memory stick or net-
work drive. The operating system, firmware and stored instrument settings are located
on drive C.
The storage location and filename are selected in a file selection dialog box which is
displayed when you perform a storage function.
By default, the name of a settings file consists of a base name followed by an under-
score and three numbers, e.g.
limit_lines_005
. In the example, the base name is
limit_lines
. The base name can contain characters, numbers and underscores.
The file extension
dfl
is added automatically. The default folder for settings files is
C:\Users\Public\Documents\Rohde-Schwarz\ZNL\user
.
File name restrictions
File names must be compatible with the Windows conventions for file names. In partic-
ular, they must not contain special characters such as ":", "*", "?".
Save and Recall Dialog Boxes
Access : "Save"/ "Open" icon in the toolbar > "Save" / "Recall"
Both dialog boxes are very similar and closely related.
Data Management
www.allice.de Allice Messtechnik GmbH