Rohde & Schwarz 1323.0012.03, User Manual

Page: 292 / 1014

VNA GUI Reference
R&S
®
ZNL/ZNLE
292 User Manual 1178.5966.02 ─ 07
9.2.3 Time Domain X-Axis Tab
If the active trace is a time domain trace, these settings define its stimulus axis.
●
Time domain analysis requires option R&S ZNL-K2. If this option is not installed,
the "Time Domain X-Axis" tab is hidden.
●
Since fimware version 1.30, this option is also available for the R&S ZNLE.
Related information
Refer to the following sections:
●
Chapter 8.7.1, "Time Domain Analysis" , on page 275
●
Chapter 9.6.5, "Time Domain Tab" , on page 335
Figure 9-1: Stimulus > Time Domain X-Axis softtool tab
left = Time representation
right = Distance representation
Time Start / Time Stop / Time Center / Time Span
Defines the display range for the time domain trace in time representation (see "Time /
Distance" on page 293).
●
"Time Start" is the lowest displayed time and corresponds to the left edge of the
Cartesian diagram.
●
"Time Stop" is the highest displayed time and corresponds to the right edge of the
Cartesian diagram.
●
"Time Center" corresponds to the center of the Cartesian diagram, i.e. ("Time Start"
+ "Time Stop")/2.
●
"Time Span" corresponds to the diagram width, i.e. ("Time Stop" – "Time Start").
"Time Start" and "Time Stop" or "Time Center" and "Time Span" are alternative set-
tings.
Stimulus Softtool
www.allice.de Allice Messtechnik GmbH