VNA GUI Reference
R&S
®
ZNL/ZNLE
349
User Manual 1178.5966.02 ─ 07
Remote command:
CALCulate<Chn>:TRANsform:DTFault:PEAK:COUNt?
CALCulate<Chn>:TRANsform:DTFault:PEAK:DATA<FaultNo>
Contents
●
"All Channels" (default)
The table displays the faults of all Distance to Fault traces in the current channel
setup.
●
"Active Channel"
The table displays the faults of all Distance to Fault traces in the active channel (if
any).
●
"Active Trace"
The table displays the faults of the active trace (in case it is a Distance to Fault
trace) .
Export to File... ← Contents
Opens a dialog that allows to export the (filtered) content of the fault list to an ASCII file
with configurable "Field Separator" and "Decimal Separator".
This CSV type file contains one line (terminated by CR+LF) per fault. With ";" as "Field
Separator" and "." as "Decimal Separator", the fault list of
is exported to
1; Trc1; 457.2 mm; -8.56 dB
2; Trc1; 1.539 m; -9.24 dB
For an explanation of the possible filters see
Tracking Enabled
If checked (default), the
on page 348 is cleared at every sweep start and
populated in real time. Uncheck "Tracking Enabled" to freeze the table contents.
9.6.8
Trace Statistics Tab
Evaluates statistical and phase information of the entire trace or of a specific evalua-
tion range.
Trace Softtool
www.allice.de
Allice Messtechnik GmbH
