Rohde & Schwarz 1323.0012.03, User Manual

Page: 425 / 1014

VNA GUI Reference
R&S
®
ZNL/ZNLE
425 User Manual 1178.5966.02 ─ 07
9.11.1.1 Controls on the Peak Tab
Max / Min
Sets the active marker to the absolute maximum or minimum in the search range, i.e.
to the largest or smallest of all response values. If a complex trace format (e.g. a polar
diagram) is active, the marker is set to the measurement point with the maximum or
minimum magnitude.
"Max" and "Min" also overwrite the current "Search Mode" (--> "Search Min" and
"Search Max") and the "Peak Type" for the peak search functions.
Remote command:
CALCulate<Chn>:MARKer<Mk>:FUNCtion:EXECute MINimum | MAXimum
CALCulate<Chn>:MARKer<Mk>:FUNCtion:RESult?
Center = Marker
See "Center = Marker / Start = Marker / Stop = Marker / Span = Marker" on page 421.
Next Peak
Sets the active marker to the next local maximum or minimum in the search range,
depending on the selected
Peak Type .
Remote command:
CALCulate<Chn>:MARKer<Mk>:FUNCtion:EXECute NPEak
CALCulate<Chn>:MARKer<Mk>:FUNCtion:RESult?
Peak Left / Peak Right
Sets the active marker to the next local maximum or minimum to the left or right of the
current marker position, depending on the selected
Peak Type .
Marker Search Softtool
www.allice.de Allice Messtechnik GmbH