manualshive.com logo in svg

Rohde & Schwarz 1323.0012.03, User Manual

Share
Download
Rohde & Schwarz 1323.0012.03 User Manual Download Page 155

Common Instrument Functions

R&S

®

 ZNL/ZNLE

155

User Manual 1178.5966.02 ─ 07

the port configured for remote-control. All R&S

 

ZNL/ZNLE use port number 5025 for

this purpose. The port is configured for communication on a command-to-command
basis and for remote control from a program.

LXI Web Browser Interface

LAN eXtensions for Instrumentation (LXI) is an instrumentation platform for measuring
instruments and test systems that is based on standard Ethernet technology. LXI is
intended to be the LAN-based successor to GPIB, combining the advantages of Ether-
net with the simplicity and familiarity of GPIB. The LXI browser interface allows for
easy configuration of the LAN and remote control of the R&S

 

ZNL/ZNLE without addi-

tional installation requirements.

The instrument's LXI web browser interface works correctly with all W3C compliant
browsers.

Via the LXI browser interface to the R&S

 

ZNL/ZNLE you can control the instrument

remotely from another PC. Manual instrument controls are available via the front panel
simulation. File upload and download between the instrument and the remote PC is
also available. Using this feature, several users can access 

and operate

 the R&S

 

ZNL/

ZNLE simultaneously. This is useful for troubleshooting or training purposes.

For details, see 

"How to Configure the LAN Using the LXI Web Browser Interface"

on page 174 and 

Chapter 7.4.5.5, "How to Control the R&S

 

ZNL/ZNLE via the Web

Browser Interface"

, 

on page 179.

If you do not want other users in the LAN to be able to access and operate the
R&S

 

ZNL/ZNLE you can deactivate this function.

See 

Chapter 7.4.5.6, "How to Deactivate the Web Browser Interface"

, 

on page 180.

To display the LXI web browser interface

► In the address field of the browser on your PC, type the host name or IP address of

the instrument, for example: 

http://10.113.10.203

.

The instrument home page (welcome page) opens.

Network and Remote Settings

www.allice.de 

Allice Messtechnik GmbH 

Summary of Contents for 1323.0012.03























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands