VNA GUI Reference
R&S
®
ZNL/ZNLE
462
User Manual 1178.5966.02 ─ 07
A cal unit characterization can be performed in a frequency sweep. The "Characterize
Cal Unit" dialog is unavailable while a CW Mode or time sweep is active. The analyzer
always uses a fixed source power of -10 dBm to acquire the characterization data.
Controls in the Characterize Cal Unit Dialog
Calibration Unit
Displays the connected calibration units. The R&S
ZNL/ZNLE auto-detects all calibra-
tion units which are connected to one of its USB ports. If several cal units are connec-
ted, one of them must be selected for characterization (active cal unit).
Remote command:
SYSTem:COMMunicate:RDEVice:AKAL:ADDRess:ALL?
SYSTem:COMMunicate:RDEVice:AKAL:ADDRess
Authentication
Allows you to set a password to protect the characterization dialog and the
from unauthorized access and operation. "Set Password..." opens a dia-
log to enter the password and activate password protection at the next time the "Set
Password" dialog is opened. Enter an empty string (no password) to deactivate pass-
word protection.
Tip:
A password also blocks a switchover of the active characterization during calibra-
tion; see
Remote command:
[SENSe:]CORRection:COLLect:AUTO:CKIT:PASSword
Cal Softtool
www.allice.de
Allice Messtechnik GmbH
