Rohde & Schwarz 1323.0012.03, User Manual

Page: 415 / 1014

VNA GUI Reference
R&S
®
ZNL/ZNLE
415 User Manual 1178.5966.02 ─ 07
●
The controls on this tab are only active if the active trace is displayed in cartesian
format.
●
If another trace format is selected, the line (position) is deleted.
Show Horiz. Line
Displays or hides the horizontal line.
Remote command:
CALCulate<Chn>:DLINe:STATe
Response Value
Defines/shows the response value of the horizontal line.
Tip: Use the R&S ZNL/ZNLE's drag and drop functionality to move the horizontal line
to a particular position. The response value appears in the numeric entry field.
Remote command:
CALCulate<Chn>:DLINe
9.10 Marker Settings Softtool
The "Marker Settings" are used to position markers on a trace and define their (dis-
play) properties.
Access: [Mkr]
Background information
See Chapter 8.2.1.3, "Markers" , on page 199.
● Markers Tab .......................................................................................................... 415
● Marker Props Tab ..................................................................................................418
● Set by Marker Tab .................................................................................................420
● Info Field Tab .........................................................................................................422
● Marker Coupling Tab .............................................................................................422
9.10.1 Markers Tab
Creates markers and configures their properties. Markers are available for all trace for-
mats.
Marker Settings Softtool
www.allice.de Allice Messtechnik GmbH