VNA GUI Reference
R&S
®
ZNL/ZNLE
354
User Manual 1178.5966.02 ─ 07
Infinite Average/Restart
"Infinite Average" enables or disables "Infinite Averaging " (default: disabled), "Restart"
starts a new averaging cycle.
Remote command:
CALCulate<Chn>:IAVerage[:STATe]
9.6.10
Smooth Shift Hold Tab
Provides various functions to modify the entire measured trace.
●
The analyzer can export the raw complex (unformatted) data or formatted data.
The unformatted data are independent of all "Smooth Shift Hold" settings; see
●
For complex traces, if marker format and trace format do not coincide, the marker
values are calculated before
are applied. In this case, the dis-
played marker values may not behave as expected.
Smoothing
Activates the smoothing function for the active trace, which can be a data or a memory
trace. With smoothing active, each measurement point is replaced by the arithmetic
mean value of all measurement points located in a symmetric interval centered on the
stimulus value. The width of the smoothing interval is referred to as the
can be adjusted according to the properties of the trace.
Trace Softtool
www.allice.de
Allice Messtechnik GmbH
