Command Reference
R&S
®
ZNL/ZNLE
786
User Manual 1178.5966.02 ─ 07
FPORts (or omitted)
Standard port sequence (network port 1 towards VNA, network
port 2 towards DUT)
IPORts | SGATes
Inverted port sequence (network port 2 towards VNA, network
port 1 towards DUT)
Example:
CALC:TRAN:VNET:SEND:EMB:TND FIMP
Select the "Serial .s2p" data circuit model.
MMEM:LOAD:VNET:SEND:EMB2 'C:\Users\Public
\Documents\Rohde-Schwarz\Vna\VNET\Test.s2p'
Load a Touchstone file and assign it to the physical port no. 2.
Manual operation:
MMEMory:STORe:CABLe
<OutputDir>
Saves all predefined and user-defined Distance to Fault (DtF) cable types to the speci-
fied output directory.
Each DtF cable type is stored in a separate ASCII file
<cable name>.rsc
. The com-
mand silently overwrites files of the same name previously existing in the output direc-
tory.
Setting parameters:
<OutputDir>
Output Directory, must be created before the command is exe-
cuted
Example:
see
Usage:
Setting only
Options:
R&S
ZNL-K3
Manual operation:
MMEMory:STORe:CKIT
<CalKitName>, <CalKitFile>
Stores the data of a calibration kit to a specified file. The calibration kit is identified by
its name.
Setting parameters:
<CalKitName>
Name of a user-defined calibration kit available on the analyzer.
Tip:
It is not possible to modify or store predefined or ideal kits.
<CalKitFile>
String parameter to specify the name and directory of the cal kit
file to be created. The file is a network analyzer-specific cal kit
file with the extension
*.calkit
.
If no path is specified the analyzer searches the current direc-
tory, to be queried with
?
VNA Command Reference
www.allice.de
Allice Messtechnik GmbH
