VNA GUI Reference
R&S
®
ZNL/ZNLE
324
User Manual 1178.5966.02 ─ 07
Show <Trace Name> / Hide All Other Traces / Show All Traces
Configures the visibility of the traces in the active diagram:
●
"Show <Trace Name>" toggles the visibility of the
●
"Hide All Other Traces" hides all traces of the active diagram – except the active
one (which can be visible or not)
●
"Show All Traces" makes all traces of the active diagram visible
Note:
●
These actions can also be performed from the context menu of the trace name
segment in the trace list (see
Chapter 8.2.1.4, "Channel List and Channel Set-
●
Use the "On" flags in the "Trace Manager" to show/hide arbitrary sets of traces
(see
Chapter 9.6.1.2, "Trace Manager Dialog"
9.6.1.2
Trace Manager Dialog
The "Trace Manager" dialog allows you to perform operations on traces.
Access:
[Trace] > "Traces" > "Trace Manager..."
All existing traces of the current channel setup are listed in a table with several editable
(white) or non-editable (gray) columns.
Table Area
The table contains the following columns:
●
"Name" indicates name of the related trace.
Trace names must be unambiguous across all channels and diagram areas in a
channel setup.
●
"On" indicates and controls the visibility of the related trace.
●
"Label" indicates and controls the visibility of the related trace label
●
"Meas" indicates the measured parameter.
●
"Type" indicates whether the trace is a data trace ("DAT"), displaying the current
measurement data, or a memory trace ("MEM").
●
"Channel" indicates and controls the channel to which the related trace is assigned.
Data traces and their associated memory traces are always assigned to the same
channel.
●
"Diagram" indicates and controls the diagram area to which the related trace is
assigned.
●
"Scale" indicates and controls the scale coupling of the related trace.
A trace's scaling can either be uncoupled ("Scale" empty) or coupled to another
trace's scaling.
Trace Softtool
www.allice.de
Allice Messtechnik GmbH
