Rohde & Schwarz 1323.0012.03, User Manual

Page: 357 / 1014

VNA GUI Reference
R&S
®
ZNL/ZNLE
357 User Manual 1178.5966.02 ─ 07
"Complex" Dyn_Shift(z) = z – zr
Remote command:
n.a.
9.6.11 Trace Data Tab
Stores one or several data or memory traces to a file or loads a memory trace from a
file.
Background information
Refer to Chapter 8.4.2, "Trace Files" , on page 237.
All buttons on the "Trace Data" tab serve as "openers" for related dialogs:
●
"Import..." calls up a dialog to load a memory trace from a trace file; see Chap-
ter 9.6.11.1, "Import Complex Data Dialog" , on page 357.
●
The buttons in the "Export snp Files" section call up a dialog to store data or mem-
ory traces to a trace file of the corresponding content and file format; see
Chap-
ter 9.6.11.2, "Export Data - <File Type> Dialog" , on page 358
●
"snp Free Config..." opens a dialog to define the port assignment for the created
Touchstone (
*.s<n>p
) file. See Chapter 9.6.11.4, "Select Ports Dialog" ,
on page 362.
9.6.11.1 Import Complex Data Dialog
The "Import Complex Data" dialog loads a memory trace from a trace file. Trace files
are ASCII files with selectable file format. The loaded trace data is used to generate a
memory trace which is coupled to the active data trace.
Access: [Trace] > "Trace Data" > "Import..."
Trace Softtool
www.allice.de Allice Messtechnik GmbH