Rohde & Schwarz 1323.0012.03, User Manual

Page: 732 / 1014

Command Reference
R&S
®
ZNL/ZNLE
732 User Manual 1178.5966.02 ─ 07
Query parameters:
<ChannelName> Channel name, e.g.
'Channel 4'
.
Example: See
CONFigure:CHANnel:CATalog?
Usage: Query only
Manual operation: See "Table Area" on page 324
CONFigure:CHANnel<Ch>:TRACe:REName <TraceName>
Assigns a (new) name to the active trace in channel
<Ch>
.
Suffix:
<Ch>
.
Channel number
Setting parameters:
<TraceName> Trace name, e.g.
'Trace 4'
.
Example: *RST; :CONF:CHAN:TRAC:REN 'Testtrace_1'
Reset the analyzer to create a default trace in channel 1 and set
this trace as the active trace. Rename the trace 'Testtrace_1'.
CALC:PAR:SDEF 'Testtrace_2', 'S11'
Create a new trace which will become the active trace in chan-
nel no. 1.
CONF:TRAC:REN 'Testtrace_1', 'Testtrace_3'
Rename the first trace (which is currently not active) 'Test-
trace_3'.
Usage: Setting only
Manual operation: See "Table Area" on page 324
CONFigure:CHANnel<Ch>:TRACe:CATalog?
Returns the numbers and names of all traces in channel no.
<Ch>
. The response is a
string containing a comma-separated list of trace numbers and names; see example. If
all traces have been deleted the response is an empty string ("").
Tip: Use
CONFigure:TRACe:CATalog?
to query the traces in all channels of the
active channel setup.
Suffix:
<Ch>
.
Channel number
Example: See
CONFigure:TRACe:CATalog?
Usage: Query only
Manual operation: See "Table Area" on page 324
VNA Command Reference
www.allice.de Allice Messtechnik GmbH