Rohde & Schwarz 1323.0012.03, User Manual

Page: 919 / 1014

Command Reference
R&S
®
ZNL/ZNLE
919 User Manual 1178.5966.02 ─ 07
Tip: Use
CALCulate<Chn>:MARKer<Mk>:BWIDth
to set the bandwidth and query
the results of a bandfilter search. Note the sign convention for input values.
Suffix:
<Chn>
.
Channel number used to identify the active trace.
<Mk> This numeric suffix is ignored and may be set to any value
because the bandfilter search functions always use markers M1
to M4.
Parameters:
<Bandwidth> Range: -100 dB to 100 dB
Increment: 0.03 dB
*RST:
3 dB
Default unit: dB
Example: See
CALCulate<Chn>:MARKer<Mk>:BWIDth
CALCulate<Chn>:MARKer<Mk>:FUNCtion:DELTa:STATe <Boolean>
Switches the delta mode for marker
<Mk>
on trace no.
<Chn>
on or off.
Note: This command is the ZVR-compatible equivalent of
CALCulate<Chn>:
MARKer<Mk>:DELTa[:STATe]
.
Suffix:
<Chn>
.
Channel number used to identify the active trace.
<Mk> Marker number.
Parameters:
<Boolean> ON | OFF - enable or disable the delta mode.
*RST:
OFF
CALCulate<Chn>:MARKer<Mk>:FUNCtion:TARGet <SearchValue>
Defines the target value for the target search of marker no.
<Mk>
, which can be activa-
ted using
CALCulate<Chn>:MARKer<Mk>:FUNCtion:EXECute TARGet
.
Note: This command is the ZVR-compatible equivalent of
CALCulate<Chn>:
MARKer<Mk>:TARGet
.
Suffix:
<Chn>
.
Channel number used to identify the active trace.
<Mk> Marker number.
VNA Command Reference
www.allice.de Allice Messtechnik GmbH