Rohde & Schwarz 1323.0012.03, User Manual

Page: 391 / 1014

VNA GUI Reference
R&S
®
ZNL/ZNLE
391 User Manual 1178.5966.02 ─ 07
Delete Diagram
Deletes the current diagram area including all traces displayed in the diagram area.
The remaining diagrams are renumbered; each channel setup always contains dia-
grams with contiguous numbers. "Delete Diag Area" is disabled if the channel setup
contains only one diagram area: In manual control, each channel setup must contain at
least one diagram area with one channel and one trace.
Tip: To restore a diagram area that was unintentionally deleted, use the undo function-
ality.
Remote command:
DISPlay[:WINDow<Wnd>][:STATe] OFF
Maximize Diagram
Maximizes the active diagram or restores the previous diagram arrangement.
For other split types, use the functions in the Split Tab .
Remote command:
DISPlay[:WINDow<Wnd>]:MAXimize
Title
Defines a title for the Active Diagram .
The visibility of the title area can be toggled using Show Title .
Remote command:
DISPlay[:WINDow<Wnd>]:TITLe:DATA
Via remote control, it is also possible to define a diagram name , and to retrieve the
lists of diagrams together with their names:
DISPlay[:WINDow<Wnd>]:NAME
DISPlay[:WINDow<Wnd>]:CATalog?
Show Title
Displays or hides the title area of the active diagram.
This property can only be set if Title is non-empty. If "Title" is empty, the title area is
always hidden
Remote command:
DISPlay[:WINDow<Wnd>]:TITLe[:STATe]
Overlay All
Places all traces in a single diagram area which is maximized to occupy the whole
screen. This function is available irrespective of the trace format and the channel set-
tings; it is even possible to overlay Cartesian and complex diagrams.
Display Lines Softtool
www.allice.de Allice Messtechnik GmbH