Common Instrument Functions
R&S
®
ZNL/ZNLE
173
User Manual 1178.5966.02 ─ 07
8. Confirm the displayed message ("Yes" button) to restart the instrument.
Using a DNS server to determine the IP address
If a DNS server is configured on the R&S
ZNL/ZNLE, the server can determine the cur-
rent IP address for the connection using the permanent computer name.
1. Obtain the name of your DNS domain and the IP addresses of the DNS and WINS
"How to Change the Instrument Name"
2. Press the [Setup] key and then the "N Remote" softkey.
3. In the "Network" tab, select the "Open Dialog 'Network Connections'" button.
4. Double-tap the "Local Area Network" entry.
5. In the "Local Area Connection Status" dialog box, select the "Properties" button.
The items used by the LAN connection are displayed.
6. Tap the entry named "Internet Protocol Version 4 (TCP/IPv4)" to highlight it.
7. Select the "Properties" button.
8. On the "General" tab, select "Use the following DNS server addresses" and enter
your own DNS addresses.
For more information refer to the Windows operating system Help.
How to Change the Instrument Name
In a LAN that uses a DNS server (Domain Name System server), each PC or instru-
ment connected in the LAN can be accessed via an unambiguous computer name
instead of the IP address. The DNS server translates the host name to the IP address.
This is especially useful when a DHCP server is used, as a new IP address may be
assigned each time the instrument is restarted.
Each instrument is delivered with an assigned computer name, but this name can be
changed.
Network and Remote Settings
www.allice.de
Allice Messtechnik GmbH
