VNA GUI Reference
R&S
®
ZNL/ZNLE
404
User Manual 1178.5966.02 ─ 07
Add / Insert / Delete / Delete All
The first four buttons below the segment list extend or shorten the list. The analyzer
places no restriction on the number of segments in a limit line.
●
Add
adds a new segment to the end of the list. The new segment extends from the
"Stop Stimulus" value of the last segment to the end of the sweep range. Its
response values are equal to the "Stop Response" value of the last segment.
●
Insert
adds a new segment before the active segment (marked by a blue back-
ground in the first column of the segment list). The new segment extends from the
"Stop Stimulus" value of the segment before the active segment to the "Start Stim-
ulus" value of the active segment. Its response values are equal to the "Start
Response" value of the active segment. The segment numbers in the list are adap-
ted.
If no segment is active, "Insert" is equivalent to "Add".
●
Delete
removes the selected segment from the list.
●
Delete All
clears the entire segment list so it is possible to define or load a new
limit line.
Remote command:
CALCulate<Chn>:LIMit:DELete:ALL
Recall... / Save...
The buttons open an "Open File" / "Save File" dialog to load a limit line from a limit line
file or store the current limit line configuration to a file.
Limit line files are ASCII files with the default extension
*.limit
and a special file for-
Chapter 8.4.1.4, "File Format for Limit Lines"
Remote command:
MMEMory:LOAD:LIMit
MMEMory:STORe:LIMit
Get Trace... / Import File...
●
"Get Trace..." opens a dialog to load a limit line from a data or memory trace in the
active channel setup.
The active trace must be cartesian and the "Format" of the imported trace must be
the same as the "Format" of the active trace.
Display Lines Softtool
www.allice.de
Allice Messtechnik GmbH
