Rohde & Schwarz 1323.0012.03 User Manual Download Page 792

Page: 792 / 1014

Command Reference

R&S

ZNL/ZNLE

792

User Manual 1178.5966.02 ─ 07

Example:

*RST; :CONF:TRAC:NAME?

Reset the instrument, creating a default channel no 1 and a
default trace Trc1.

CALC:PAR:DEF:SGR 1,2

Create four traces to measure the two-port S-parameters S

, S

. The traces are not displayed.

MMEM:STOR:TRAC:CHAN 1, 'C:\Users\Public
\Documents\Rohde-Schwarz\Vna\Traces\Chn1.csv'

Store all trace data of channel 1 to a trace file.

MMEM:STOR:TRAC:CHAN 1, 'C:\Users\Public
\Documents\Rohde-Schwarz\Vna\Traces\Chn1.s2p'

Store the four S-parameter traces to a two-port Touchstone file.
The Touchstone file will not contain the default trace Trc1.

Usage:

Setting only

Manual operation:

See

"Save"

on page 361

MMEMory:STORe:TRACe:OPTion:PLUS

<arg0>

This command defines how positive numbers are prefixed during Touchstone file
export: by a leading space, a plus sign or not at all.

Parameters:

<arg0>

SPACe | PLUS | VOID

Manual operation:

See

"Positive Number Prefix "

on page 150

MMEMory:STORe:TRACe:OPTion:SSEParator

This command defines whitespace insertion during Touchstone file export.

If set to ON, separator lines are skipped, i.e. the content parts are no longer separated
by blank lines.

Parameters:

Manual operation:

See

"Skip Separator Lines "

on page 150

MMEMory:STORe:TRACe:OPTion:TABS

This command defines whitespace insertion during Touchstone file export.

If set to ON, columns are separated by tabs rather than spaces.

Parameters:

Manual operation:

See

"Use TAB (instead of blanks) "

on page 149

VNA Command Reference

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for 1323.0012.03























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 1323.0012.03

Reviews:

Brands by name

Popular brands

Rohde & Schwarz 1323.0012.03, User Manual

Search results

Summary of Contents for 1323.0012.03

Reviews:

Brands by name

Popular brands