Rohde & Schwarz 1323.0012.03, User Manual

Page: 631 / 1014

Command Reference
R&S
®
ZNL/ZNLE
631 User Manual 1178.5966.02 ─ 07
CALCulate<Chn>:MARKer<Mk>:REFerence[:STATe] <Boolean>
Creates the reference marker and assigns it to trace no.
<Chn>
.
Suffix:
<Chn>
.
Channel number used to identify the active trace
<Mk> This numeric suffix is ignored and may be set to any value.
Parameters:
<Boolean> ON | OFF - creates or removes the marker.
*RST:
OFF
Example: Suppose that the active channel setup contains an active trace
no. 1.
CALC:MARK:REF ON; :CALC:MARK ON
Create the reference marker and marker 1 and assign them to
trace no. 1. The default position of both markers is the center of
the sweep range.
Manual operation: See "On" on page 416
CALCulate<Chn>:MARKer<Mk>:REFerence:FORMat <OutFormat>
Sets/queries the output format for the (complex) value of the reference marker.
Suffix:
<Chn>
.
Channel number used to identify the active trace
<Mk> This numeric suffix is ignored and may be set to any value.
Parameters:
<OutFormat> DEFault | MLINear | MLOGarithmic | MDB | PHASe | POLar |
COMPlex | GDELay | REAL | IMAGinary | SWR | LINPhase |
MLPHase | LOGPhase | MDPHase | IMPedance | ADMittance |
MIMPedance
DEFault
means the reference marker is formatted according
the related trace's default marker format (see
CALCulate<Chn>:MARKer:DEFault:FORMat
).
For the other marker formats see
CALCulate<Chn>:MARKer:
DEFault:FORMat
and the description in "Marker Format"
on page 201.
*RST:
DEFault
Manual operation: See "Marker Format" on page 419
CALCulate<Chn>:MARKer<Mk>:REFerence:MODE <Mode>
Sets the reference marker to continuous or discrete mode. The marker doesn't have to
be created before (
CALCulate<Chn>:MARKer<Mk>[:STATe] ON
), the mode can be
assigned in advance.
VNA Command Reference
www.allice.de Allice Messtechnik GmbH