Common Instrument Functions
R&S
®
ZNL/ZNLE
147
User Manual 1178.5966.02 ─ 07
Sounds
Switches the sounds generated by the analyzer firmware on or off. Sounds are gener-
ated for certain GUI events, when the analyzer generates a notice, status or warning
message (alarm sounds) or during calibration.
The generation of limit fail beeps for
ted by this setting. If enabled, those beeps are generated even if "Sounds" is
unchecked.
Note:
The R&S
ZNL/ZNLE does not have a built-in audio device and loudspeaker. To
hear these sounds, connect a USB audio device to the instrument or operate it via
remote desktop.
/ Transparent Info Fields / Show Sweep Symbols
The buttons switch the instrument messages, acoustic messages, transparent info
fields for markers and trace statistics, and sweep symbols on or off.
●
Transparent info fields do not hide an underlying trace.
●
The sweep symbols are arrows pointing downward onto the trace. They are dis-
played if the sweep time exceeds an upper limit (e.g. if the number of points is high
or the measurement bandwidth is low).
Remote command:
n.a.
Use Default Tab for Hardkey
If the checkbox is selected (system default), the
enabled tab of their associated softtool. Otherwise the last used tab is activated.
For background information, see
Chapter 9.1, "Function Keys and Softtools"
Remote command:
n/a
General Instrument Setup
www.allice.de
Allice Messtechnik GmbH
